Honeywell Vocollect Hardware Reference Manual page 183

5. Make final adjustments with the flexible boom so that the microphone is positioned correctly. Position the
microphone as close to your mouth as possible, but outside of your breath stream. It should be facing your upper
lip, and not touching anything (for example, clothing, skin, or facial hair).
Installing the Stability Strap on the SRX2 Wireless Headset
1. Hold the headset so that the earpad faces you and the electronics module faces away.
2. Locate the knob on the inside of the headband near the earpad.
3. Hold the strap so that the end with the hole fits over the knob on the headband, and press down firmly so the knob
comes all the way up through the hole.
Figure 130: Pressing the strap onto the earpad side of the headband
4. Turn the headset so that the t-bar pad faces you.
5. Locate the slot on the end of the headband near the t-bar.
6. Align the knob at the free end of the strap with the slot on the headband.
7. Slide the knob into the slot until it snaps into place.
Figure 129: Moving the Microphone Into Position
| Honeywell Wireless Headsets | 183