Headset Specifications; Wearing The Sl-14 Or Sl-4 Behind-The-Head Headset; Proper Use And Care Instructions For Talkman T1 And Sl-4/Sl-14 Headsets - Honeywell Vocollect Hardware Reference Manual

Operating temperature
Storage temperature
Humidity
Enclosure rating
Noise Reduction Rating
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total
shipment weight.
SL-4 Headset Specifications
Weight
Operating temperature
Storage temperature
Humidity
Enclosure rating
Noise Reduction Rating
Note: Packaging varies for product shipments. Generally, packing materials are about 15% of the total
shipment weight.

Wearing the SL-14 or SL-4 Behind-the-Head Headset

1. Adjust the headset's adjustable headband so it will fit snugly on your head.
2. Place the headset behind your head, and slip the ear loops over your ears.
3. Place the microphone at the corner of your mouth. Position the microphone as close to your mouth as possible,
but outside of your breath stream. It should be facing your upper lip, and not touching anything (for example,
clothing, skin, or facial hair).
4. Clip the headset cord to the collar or top of your shirt or jacket where it can comfortably fall down your back. This
keeps the cord away from your chest and arms where it can become tangled with your work.
5. Let the cable fall down your back, and clip it to the belt near the device.
6. Connect the headset to the device.

Proper Use and Care Instructions for Talkman T1 and SL-4/SL-14 Headsets

The equipment you have purchased has been carefully inspected at the factory. It is not designed to withstand abuse,
including use in condensing, wet or freezing conditions. The instructions below are designed to ensure the equipment
continues to function in accordance with the published specifications. Damage may be caused to the equipment when
used or maintained in an improper manner. Honeywell will not honor repair or replacement requests for damages
caused by improper use, maintenance, negligence or abuse, including, but not limited to, those specifically identified
below. In these cases, a replacement headset purchase is required, regardless of the age or warranty status of the
original equipment.
32°F to 122°F (0°C to 50°C)
-40°F to 158°F (-40°C to 70°C)
5-95% non-condensing
Meets IP54
Not applicable
2.19 ounces (62 g) with cable
1.13 ounces (32 g) without cable
0°C to 50°C (32°F to 122°F)
-40°C to 70°C (-40°F to 158°F)
5-95% non-condensing
Meets IP54
Not applicable
| Honeywell Wired Headsets | 153