Replacing The Ear Pad On The Sr-15 Headset; Sr-20-Series Vocollect Lightweight Headset; Sr-20 Headset Specifications - Honeywell Vocollect Hardware Reference Manual

5. Tighten the screws with 3.0 in-lbs (0.34 Nm) torque so that there is no gap between parts 1 and 2.
6. Using the plunger, attach the cord to the cord clip.

Replacing the Ear Pad on the SR-15 Headset

1. With headset removed and disconnected, rotate the headband away from the microphone/speaker assembly.
• If the cable is clipped to the center of the back of the headset, either unclip it or allow enough slack to be able
to move the headband away from the microphone/speaker assembly.
2. Remove the worn foam cover from the speaker assembly.
3. Place the new foam cover over one of the three mounting ribs.
4. Gently pull the foam over the other two mounting ribs.
5. Rotate the microphone/speaker assembly back towards the headband.
You will hear a click when it is in place.

SR-20-Series Vocollect Lightweight Headset

The SR-20 Vocollect ™
as extreme temperature differences, condensation and accidental drops. The SR-20 Headset also remains comfortable
during a full shift.
The SR-21 Headset is a universal version designed to be used with handheld devices.

SR-20 Headset Specifications

SR-20 with straight cord
Weight
Operating temperature
Storage temperature
Drop Tested
Figure 108: The SR-20 Lightweight Headset
Lightweight Headset is able to withstand heavy use in challenging warehouse conditions, such
5.4 ounces (153 g) with cable
3.9 ounces (110 g) without cable
-40°F to 122°F (-40° to 50°C)
-40°F to 158°F (-40° to 70°C)
• 15 drops from 7 feet (2.1 m) at minimum and
maximum operating temperatures
• 50 drops from 6 feet (1.8 m) at minimum and
maximum operating temperatures
| Honeywell Wired Headsets | 158