Talkman A500/T5 Vmt Accessories - Honeywell Vocollect Hardware Reference Manual

Talkman A500/T5 VMT Accessories

The Talkman A500/T5 VMT is designed to be installed using RAM
supplies a mounting bracket for the A500/T5 and mounting hardware from RAM Mounting Systems. Additional
hardware mounting bracket options can be purchased directly from RAM Mounting Systems (www.ram-mount.com)
to customize the installation.
The A500/T5 VMT must be mounted to a sturdy surface.
Figure 32: Screw On Mounting Parts
Figure 34: Clamp Mounting Parts
Figure 36: Battery Adapter
Note: You may provide your own power supply, but it must supply 12-15V at 1 Amp and must be limited
to less than 250VA (Watts). If you chose to provide your own, you are still required to purchase the battery
adapter cable and battery adapter for final connection to the A500 or T5-Series device.
® Mounting Systems hardware. Honeywell
Figure 33: Screw On Mounting
Figure 35: Clamp Mounting
Figure 37: Power Supply
| Talkman A500 | 89