Honeywell Vocollect Hardware Reference Manual page 127

Putting a Cover on an A500 or T5-Series Device
1. If the device is not already off, press and hold the yellow play/pause button until the LED indicator turns solid red
and then off.
2. Disconnect any peripherals.
3. Hold the device with the battery compartment facing up and the device's buttons facing toward you.
4. Slide the open end of the cover over the connection port end of the device. Pull gently on the cover to make sure it
slides behind the tab, located on the bottom of the device, that holds the cover securely in place.
Figure 86: Putting a Cover on a Talkman T5-Series Device
5. Stretch the rounded end of the cover over the rounded end of the device.
6. Attach the peripherals that you will be using.
| Talkman T5 Series | 127