Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 63

Chapter 3 Installing the Wall-Mounted Reflector Wall Structure
If the gaps between the panels are uneven, use the shims in the accessory kit to place between the bottom
Step 8
of the panel and the bottom ledge of the Z bracket.
Key Part Description
1 Shim
Figure 3-10 Placing Shims to Raise the Reflector Panels
OL-27038-01
Part/Kit Number
700-39916-xx
Kit #69-2291-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Installing the Reflector to the Wall
Qty Ctn Notes
24 43-A
3-11