Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 166

Starting Installation of the First Row Table
Assemble the power/Ethernet outlet assembly by completing the following steps:
Step 5
a.
b.
Note
Key Part Description
1 Power/Ethernet outlets
2 Power/Ethernet outlet cover, front
3
Nuts
4
Front row Ethernet cable, 6 meters
(20 feet)
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
9-6
Attach two power/Ethernet outlets (callout 1) into the front of the table leg (callout 2) using eight
nuts (callout 3).
Connect the Ethernet ethernet cables (callout 4) and, if applicable, the power jumper cables to the
power/Ethernet outlets.
Note the orientation of the power/Ethernet outlets; you can only install them in one orientation.
Part Number
See "Notes"
section.
700-37102-01
Kit #69-2338-xx
Except South
Africa (see Notes)
From the
power/Ethernet
outlet kit
37-1382-01
Kit # 69-2350-01
Chapter 9 Starting Installation of the First Row Table
Qty Ctn Notes
4 22 Part number varies by
country. Refer to
Appendix C, "Region- and
Country-Specific Power
Cords and Table Leg Power
Connectors,"
part number.
2 2 The South Africa outlet cover
is specific to the outlet. Find
the covers with the
country-specific power
outlet.
8 N/A
4 17
for the correct
OL-27038-01