Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 123

Chapter 6 Installing the Free-Standing Reflector Wall Structure
Install the lower L brackets by completing the following steps:
Step 24
e.
Note
f.
g.
Key Part Description
1 Lower L brackets
2 4 x 14 mm pan head screws
OL-27038-01
Position the three L bracket on the bottom of the shelf as shown in
The brackets might be pre-installed; if they are, remove them from the wall panels.
Attach the bracket to the lower part of the frame using the pan head screws.
Attach the left and right L brackets, making sure the edges of the brackets join as shown in
Figure 6-30.
Part Number
700-36933-01
Kit #69-2292-xx
Kit #69-2292-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Figure
Qty Ctn Notes
3 43-B Brackets might be pre-installed to wall
panels
27 43-B Brackets might be pre-installed to wall
panels
6-29.
6-31