Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 135

Chapter 7 Installing the Bezel Brackets and Vertical Bezels
Slide the vertical bezels between the displays.
Step 6
Make sure that the gap between the displays is approximately 2 to 4 mm, and that the gap is
approximately the same distance for both sides. If the gap is less or more, adjust the displays by raising
or lowering the leveling feet.
Note Make sure that the top slot of the vertical bezel fits between the flip bracket. Aligning the slot with the
flip bracket places the bezel in the correct vertical orientation.
Key Part Description
1
Vertical bezel
Figure 7-7 Sliding the Vertical Brackets Into the Displays
OL-27038-01
Part Number
700-37046-xx
Kit #69-2372-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Qty Ctn
2 9
Parts List
Notes
7-9