Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 278

Assembling an 8-Seat Second Row For a 14-Seat TX9200
Install the microphones by completing the following steps:
Step 26
a.
b.
Note
c.
Key Part Description
1 Microphone assembly
2 M4 x 30mm screw
Figure 13-26 Installing the Microphones Into the Table Tops
Feed the microphone wire through the channel
in the table over into the privacy panel bracket
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
13-32
Install the microphone assemblies (callout 1) with the mute button facing away from the 65-inch
displays, using 2 M4 x 30mm screws (callout 2).
Feed the microphone cable into the privacy panel bracket.
Make sure that the cable goes into the channel that is shown in
Assemble the other 3 microphones by repeating Steps
Part Number
74-10241-xx
CTS-TX9K-MIC
N/A
Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
a. and
Qty
4
12
Figure 13-26.
b.
Ctn Notes
67-72
Included with the
microphone kit
OL-27038-01