Table of Contents
Advertisement
Quick Links
Cisco TelePresence System Codec C90 and Profile 65" Dual using C90
Administrator Guide
Contents
Introduction
Web interface
System settings
Setting passwords
Appendices
Software version TC7.0
DECEMBER 2013
Administrator guide
for Cisco TelePresence System Codec C90 and Profile 65" Dual using C90
D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013.
1
www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved.
Advertisement
Table of Contents
Related Manuals for Cisco TelePresence System Codec C90: Profile 65”
Summary of Contents for Cisco TelePresence System Codec C90: Profile 65”
-
Page 1: Administrator Guide
Software version TC7.0 DECEMBER 2013 Administrator guide for Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved. -
Page 2: Table Of Contents
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Contents Introduction Web interface System settings Setting passwords Appendices Table of Contents Thank you for choosing Cisco! Your Cisco product has been designed to give you many Introduction ................ - Page 3 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Contents Introduction Web interface System settings Setting passwords Appendices Appendices ................124 Cisco VCS provisioning ............125 About monitors ..............126 Connecting the Cisco TelePresence Touch 8 controller ..127 Advanced customization of video and audio ......128...
-
Page 4: December
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Introduction Web interface System settings Setting passwords Appendices Chapter 1 Introduction D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved. -
Page 5: User Documentation
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Introduction Web interface System settings Setting passwords Appendices User documentation This document provides you with the information required to administrate your product at an advanced level. -
Page 6: What's New In This Version
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Introduction Web interface System settings Setting passwords Appendices What’s new in this version New features and improvements This section provides an overview of the new and changed system settings and new features in the TC7.0 software... - Page 7 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Introduction Web interface System settings Setting passwords Appendices System configuration changes New configurations Configurations that are removed Configurations that are modified UserInterface UserPreferences: <Off/On> Conference Video SelfviewControl AutoResizing...
-
Page 8: Profile 65" Dual At A Glance
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Introduction Web interface System settings Setting passwords Appendices Profile 65” Dual at a glance Presentation unit Codec C90 Main system • Full HD video •... -
Page 9: Codec C90 At A Glance
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Introduction Web interface System settings Setting passwords Appendices Codec C90 at a glance The Codec C90 is used in telepresence and collaboration Design features Integrator package... -
Page 10: Web Interface
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Chapter 2 Web interface D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved. -
Page 11: Accessing The Web Interface
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Accessing the web interface 1. Connect to the video system The web interface provides full configuration access to your Open a web browser and enter the IP address of video conference system. -
Page 12: Changing The System Password
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Changing the system password We strongly recommend that you set a password for any user with ADMIN rights in order to restrict access to system configuration. -
Page 13: The Interactive Menu
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices The interactive menu The web interface provides access to tasks and configurations. They are available from the main menu, which Main menu appears near the top of the page when you have signed in. -
Page 14: System Information
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices System information Navigate to: Home The video system’s Home page shows an overview of the basic set-up and status of the system This includes information like system name and product type, which software version the system runs, its IP address, etc. -
Page 15: Placing A Call
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Placing a call Navigate to: Call Control You can use the Call Control page to place a call. -
Page 16: Sharing Content
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Sharing content Navigate to: Call Control You can connect a presentation source to one of the external inputs of your video system. -
Page 17: Controlling And Monitoring A Call
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Controlling and monitoring a call Navigate to: Call Control You can control and monitor several call features using the... -
Page 18: Controlling Your Camera
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Controlling your camera Navigate to: Call Control You can control the camera from the Call Control page. -
Page 19: Local Layout Control
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Local layout control Navigate to: Call Control You can choose a local layout using the Call Control page. -
Page 20: Capturing Snapshots
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Capturing snapshots Navigate to: Call Control The snapshot feature, which is disabled by default, allows snapshots captured by your video system to be displayed on the Call Control page. -
Page 21: Controlling The Far End Camera
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Controlling the far end camera Navigate to: Call Control While in a call, you can control the remote participant’s camera (far end) provided that: •... -
Page 22: Accessing Call Information
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Accessing call information A call state indicator is avaiable in the top bar in the web interface. -
Page 23: System Configuration
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices System configuration Navigate to: Configuration > System Configuration Searching for settings The system settings are grouped in several categories. When Enter as many letters as needed in the search field. -
Page 24: Changing System Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Changing system settings Navigate to: Configuration > System Configuration All system settings can be changed from the System Configuration page . -
Page 25: Setting The Administrator Settings Menu Password
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Setting the Administrator Settings Navigate to: Configuration > System Configuration menu password This password restricts access to the Administrator Settings menu that is available on-screen when using the remote control. -
Page 26: System Status
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices System status Navigate to: Configuration > System Status The system status is grouped in several categories. When... -
Page 27: Managing The Favorites List
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Managing the favorites list Navigate to: Configuration > Favorites Management The entries in the favorites list can be accessed from the Touch controller, the on-screen menu (the My contacts folder in the phone book) and the Web interface. -
Page 28: Favorite List Folders
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Favorite list folders Navigate to: Configuration > Favorites Management The entries in the favorites list can be organized in folders. -
Page 29: Choosing A Wallpaper
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Choosing a wallpaper Navigate to: Configuration > Personalization : Wallpaper tab You can choose from a set of predefined wallpapers to use as background on your display. -
Page 30: Choosing A Ringtone
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Choosing a ringtone Navigate to: Configuration > Personalization : Ringtone tab You can choose from a set of predefined ringtones. The chosen ringtone can be played back from this page. -
Page 31: Peripherals Overview
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Peripherals overview Navigate to: Configuration > Peripherals This page shows an overview of the video inputs and outputs,... -
Page 32: User Administration
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices User administration Navigate to: Configuration > User Administration You can manage your video conference system’s user accounts from this page. - Page 33 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices User administration, continued Navigate to: Configuration > User Administration Creating a new user account Follow these steps in order to create a new user account: 1.
- Page 34 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices User administration, continued Navigate to: Configuration > User Administration Changing user privileges Follow these steps in order to change the user privileges: 1.
- Page 35 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices User administration, continued Navigate to: Configuration > User Administration Deactivating a user account Follow these steps in order to deactivate a user account: Always keep at least one user with ADMIN rights Active.
-
Page 36: Adding A Sign In Banner
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Adding a sign in banner Navigate to: Configuration > Sign In Banner A sign in banner is a message that is shown to the user when signing in. -
Page 37: Managing Startup Scripts
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Managing startup scripts Navigate to: Configuration > Startup Scripts You can create one or more startup scripts that will run every time the video system starts up. -
Page 38: Application Programming Interface
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Application programming interface Navigate to: Configuration > API The application programming interface (API) is a tool for integration professionals and developers working with this video system. -
Page 39: Managing The Video System's Certificates
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Managing the video system’s Navigate to: Configuration > Security: Certificates tab certificates Certificate validation may be required when using TLS (Transport Layer Security). -
Page 40: Managing The List Of Trusted Certificate Authorities
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Managing the list of trusted Navigate to: Configuration > Security: CAs tab certificate authorities Certificate validation may be required when using TLS (Transport Layer Security). -
Page 41: Adding Audit Certificates
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Adding audit certificates Navigate to: Configuration > Security: CAs tab / Configuration > System Configuration Audit logging records all sign in activity and configuration 1. -
Page 42: Setting Strong Security Mode
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Setting strong security mode Navigate to: Configuration > Security: Strong Security Mode tab Strong security mode should be used only when compliance with DoD JITC regulations is required. -
Page 43: Changing The Persistency Mode
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Changing the persistency mode Navigate to: Configuration > Security: Non-persistent Mode tab By default, all persistency settings are set to Persistent. This... -
Page 44: Deleting Trust Lists (Cucm Only)
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Deleting trust lists (CUCM only) Navigate to: Configuration > Security: CUCM tab The information on this page is only relevant for video systems that are registered to a Cisco Unified Communications Manager (CUCM). -
Page 45: Troubleshooting
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Troubleshooting Navigate to: Diagnostics > Troubleshooting The troubleshooting page lists the status for some common sources of errors. The list may be different for different... -
Page 46: Downloading Log Files
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Downloading log files Navigate to: Diagnostics > Log Files The log files are Cisco specific debug files which may be... -
Page 47: Upgrading The System Software
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Upgrading the system software Navigate to: Maintenance > Software Upgrade This video conference system is using TC software. The version described in this document is TC7.0. -
Page 48: Backup And Restore
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Backup and restore Navigate to: Maintenance > Backup and Restore All the system settings, which are available on the System configuration page, can be listed on-screen or stored as a text file (.tsh). -
Page 49: System Recovery: Revert To The Previously Used Software Version
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices System recovery: Revert to the Navigate to: Maintenance > System Recovery : Backup tab and Software Recovery Swap tab... -
Page 50: System Recovery: Factory Reset
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices System recovery: Factory reset Navigate to: Maintenance > System Recovery : Backup tab and Factory Reset tab If there is a severe problem with the video system, the last resort may be to reset it to its default factory settings. -
Page 51: Restarting The System
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface Web interface System settings Setting passwords Appendices Restarting the system Navigate to: Maintenance > Restart The system can be shut down or restarted remotely using the web interface. -
Page 52: System Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Chapter 3 System settings D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved. -
Page 53: Overview Of The System Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Overview of the system settings Cameras settings ..............62 Audio settings ............... 56 Audio Input HDMI [3,4] Level ........... 56 Cameras Camera [1..7] Backlight .......... - Page 54 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Network [1..1] IPv4 Gateway ............ 76 NetworkServices SNMP SystemContact ....... 87 FacilityService settings ............70 FacilityService Service [1..5] CallType ........70 Network [1..1] IPv4 SubnetMask ..........
- Page 55 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Time settings ...............102 SIP settings ................95 Video OSD AutoSelectPresentationSource ......114 SIP ANAT ................95 Time DateFormat ..............
-
Page 56: Audio Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Audio settings Audio Input HDMI [3,4] Mode Audio Input HDMI [3,4] VideoAssociation VideoInputSource Determine if the audio channels on the HDMI input shall be enabled. The HDMI input 3 and 4 Select the associated video input source. - Page 57 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Audio Input Line [1..4] VideoAssociation MuteOnInactiveVideo Audio Input Line [1..4] Level Enable association of a video source to a Line audio input.
- Page 58 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Audio Input Microphone [1..8] EchoControl Mode Audio Input Microphone [1..8] Equalizer ID The echo canceller continuously adjusts itself to the audio characteristics of the room and Select the audio input microphone equalizer ID.
- Page 59 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Audio Input Microphone [1..8] Level Audio Output HDMI [1,3] Level Define the audio level of the Microphone input connector, in steps of 1dB.
- Page 60 Select the audio output line equalizer ID. Determine if the Audio Line output will be analog or digital type output. The digital output on the Cisco TelePresence Profile systems are identified as DNAM (Digital Natural Audio Module). Requires user role: ADMIN Requires user role: ADMIN Value space: <1..8>...
- Page 61 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Audio SoundsAndAlerts KeyTones Mode Audio Volume The system can be configured to make a keyboard click sound effect (key tone) when pressing Set the speaker volume.
-
Page 62: Cameras Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Cameras settings Cameras Camera [1..7] Backlight Cameras Camera [1..7] Flip This configuration turns backlight compensation on or off. Backlight compensation is useful With Flip mode (vertical flip) you can flip the image upside down. - Page 63 By setting the Gamma Level you can select which gamma correction table to use. This setting may be useful in difficult lighting conditions, where changes to the brightness setting does not This setting applies only when using a Cisco TelePresence PrecisionHD 1080p12x camera. provide satisfactory results. Requires the Gamma Mode to be set to Manual.
- Page 64 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Cameras Camera [1..7] Whitebalance Mode Set the camera whitebalance mode. Requires user role: ADMIN Value space: <Auto/Manual>...
-
Page 65: Conference Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Conference settings Conference [1..1] CallProtocolIPStack Conference [1..1] AutoAnswer Delay Select if the system should enable IPv4, IPv6, or dual IP stack on the call protocol (SIP, H323). - Page 66 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Conference [1..1] DoNotDisturb DefaultTimeout Conference [1..1] Encryption Mode This setting determines the default duration of a Do Not Disturb session, i.e. the period when Set the conference encryption mode.
- Page 67 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Conference [1..1] DefaultCall Rate Conference [1..1] MaxTotalTransmitCallRate Set the Default Call Rate to be used when placing calls from the system.
- Page 68 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Conference [1..1] VideoBandwidth Mode Conference [1..1] Presentation Policy Set the conference video bandwidth mode. Control how the presentation service is to be performed.
- Page 69 Allow: You will be notified when someone calls you while you are already in a call. You can If registered to a Cisco Unified Communications Manager (CUCM) version 8.6.2 or newer, the accept the incoming call or not. The ongoing call may be put on hold while answering the video system can use either the CUCM conference bridge, or the video system's own built-in incoming call;...
-
Page 70: Facilityservice Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices FacilityService settings FacilityService Service [1..5] Type FacilityService Service [1..5] Number Up to five different facility services can be supported simultaneously. With this setting you Enter the number (URI or phone number) of the facility service. -
Page 71: Gpio Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices GPIO settings GPIO Pin [1..4] Mode The four GPIO pins are configured individually. The state can be retrieved by "xStatus GPIO Pin [1..4] State". -
Page 72: H323 Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices H323 settings H323 NAT Mode H323 Profile [1..1] Authentication Mode The firewall traversal technology creates a secure path through the firewall barrier, and enables Set the authenticatin mode for the H.323 profile. - Page 73 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices H323 Profile [1..1] Authentication Password H323 Profile [1..1] Gatekeeper Address The system sends the Authentication Login Name and the Authentication Password to a H.323 Enter the IP address of the Gatekeeper.
- Page 74 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices H323 Profile [1..1] PortAllocation The H.323 Port Allocation setting affects the H.245 port numbers used for H.323 call signalling.
-
Page 75: Logging Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Logging settings Logging Mode Not applicable in this version. D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013. -
Page 76: Network Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Network settings Network [1..1] IPStack Network [1..1] IPv4 Gateway Select if the sFystem should use IPv4, IPv6, or dual IP stack, on the network interface. NOTE: Define the IPv4 network gateway. - Page 77 Network [1..1] DHCP RequestTFTPServerAddress Enter the static IPv6 network address for the system. This setting is only applicable when the This setting is used only for video systems that are registered to a Cisco Unified Network IPv6 Assignment is set to Static.
- Page 78 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Network [1..1] QoS Mode Network [1..1] QoS Diffserv Video The QoS (Quality of Service) is a method which handles the priority of audio, video and data in This setting will only take effect if Network QoS Mode is set to Diffserv.
- Page 79 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Network [1..1] QoS Diffserv Signalling Network [1..1] QoS Diffserv NTP This setting will only take effect if Network QoS Mode is set to Diffserv.
- Page 80 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Network [1..1] IEEE8021X TlsVerify Network [1..1] IEEE8021X Password Verification of the server-side certificate of an IEEE802.1x connection against the certificates in The 802.1X Password is the password needed for 802.1X authentication.
- Page 81 Set the network traffic control mode to decide how to control the video packets transmission Set the Peap (Protected Extensible Authentication Protocol) mode. Authenticates LAN clients speed. without the need for client certificates. Developed by Microsoft, Cisco and RSA Security. Requires user role: ADMIN Requires user role: ADMIN Value space: <Off/On>...
- Page 82 Requires user role: ADMIN Value space: <Auto/Manual/Off> Auto: The Cisco Discovery Protocol (CDP), if available, assigns an id to the voice VLAN. If CDP is not available, VLAN is not enabled. Manual: The VLAN ID is set manually using the Network VLAN Voice VlanId setting. If CDP is available, the manually set value will be overruled by the value assigned by CDP.
-
Page 83: Networkport Settings
Appendices NetworkPort settings NetworkPort [2] Mode Define if the network port 2 shall be enabled for direct pairing with a Cisco TelePresence Touch screen control panel. NOTE: Restart the system for any change to this setting to take effect. Requires user role: ADMIN Value space: <Inactive/DirectPairing>... -
Page 84: Networkservices Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices NetworkServices settings NetworkServices H323 Mode NetworkServices Telnet Mode Determine whether the system should be able to place and receive H.323 calls or not. - Page 85 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices NetworkServices MultiWay Address NetworkServices HTTPS VerifyServerCertificate The MultiWay address must be equal to the Conference Factory Alias, as configured on the When the video system connects to an external HTTPS server (like a phone book server or an Video Communication Server.
- Page 86 SNMP Agent in the codec. The default password is "public". If you have the Cisco TelePresence Management Suite (TMS) you must make sure the same Enter the NTP Address to define the network time protocol server address. This address will SNMP Community is configured there too.
- Page 87 NetworkServices SNMP SystemContact NetworkServices CTMS Mode Enter the name of the Network Services SNMP System Contact. This setting determines whether or not to allow multiparty conferences controlled by a Cisco TelePresence Multipoint Switch (CTMS). Requires user role: ADMIN Video systems running software TC5.0 or later are able to initiate or join non-encrypted Value space: <S: 0, 50>...
-
Page 88: Phonebook Settings
VCS: Select VCS if the phonebook is located on the Cisco TelePresence Video Communication Server. TMS: Select TMS if the phonebook is located on the Cisco TelePresence Management Suite server. Callway: Select Callway if the phonebook is to be provided by the WebEx TelePresence subscription service (formerly called CallWay). -
Page 89: Provisioning Settings
Provisioning HttpMethod Off: The video system will not be configured by a provisioning system. Select the HTTP method to be used for the provisioning. TMS: The video system will be configured using TMS (Cisco TelePresence Management Requires user role: ADMIN System). - Page 90 Value space: <S: 0, 64> Format: String with a maximum of 64 characters. Only applicable when the endpoint is provisioned by Cisco Unified Communication Manager (CUCM) and an alternate CUCM is available for redundancy. Enter the address of the alternate Provisioning ExternalManager Domain: "any.domain.com"...
-
Page 91: Rtp Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices RTP settings RTP Ports Range Start Specify the first port in the range of RTP ports. Also see the H323 Profile [1..1] PortAllocation setting. -
Page 92: Security Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Security settings Security Audit Logging Mode Security Audit Server Address Determine where to record or transmit the audit logs. The audit logs are sent to a syslog server. - Page 93 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Security Session ShowLastLogon When logging in to the system using SSH or Telnet you will see the UserId, time and date of the last session that did a successful login.
-
Page 94: Serialport Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices SerialPort settings SerialPort Mode Enable/disable the serial port (COM port). Requires user role: ADMIN Value space: <Off/On>... -
Page 95: Sip Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices SIP settings SIP ANAT SIP PreferredIPMedia ANAT (Alternative Network Address Types) enables media negotiation for multiple addresses Define the preferred IP version for sending and receiving media (audio, video, data). - Page 96 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices SIP Profile [1..1] Ice Mode SIP Profile [1..1] Turn BandwidthProbe ICE (Interactive Connectivity Establishment, RFC 5245) is a NAT traversal solution that the Not applicable in this version.
- Page 97 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices SIP Profile [1..1] Turn Password SIP Profile [1..1] Authentication [1..1] Password The password needed for accessing the TURN server.
- Page 98 Off: Connect to the single proxy configured first in Proxy Address list. On: Set up multiple outbound connections to servers in the Proxy Address list. Standard: Use this when registering to standard SIP Proxy (tested with Cisco TelePresence VCS and Broadsoft)
-
Page 99: Standby Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Standby settings Standby Control Standby StandbyAction Determine whether the system should go into standby mode or not. -
Page 100: Systemunit Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices SystemUnit settings SystemUnit Name SystemUnit ContactInfo Type Enter a System Name to define a name of the system unit. If the H.323 Alias ID is configured Choose which type of contact information to show in the status field in the upper left corner on the system then this ID will be used instead of the system name. - Page 101 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices SystemUnit IrSensor Both the Codec C Series and PrecisionHD camera have IR sensors, and only one of them needs to be enabled at the time.
-
Page 102: Time Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Time settings Time Zone Time TimeFormat Set the time zone where the system is located, using Windows time zone description format. -
Page 103: Userinterface Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices UserInterface settings UserInterface TouchPanel DefaultPanel Define what (contact list, meeting list, or dial pad) the Touch screen control panel will display on wake up. -
Page 104: Video Settings
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video settings Video AllowWebSnapshots Video DefaultPresentationSource Allow or disallow snapshots being taken of the local input sources, remote sites and Define which video input source shall be used as the default presentation source when you presentation channel. - Page 105 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Input DVI [3,5] Type Video Input Source [1..5] Name The official DVI standard supports both digital and analog signals. In most cases the default Enter a name for the video input source.
- Page 106 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Input Source [3] Connector Video Input Source [1..5] Type Select which video input connector to be active on video input source 3.
- Page 107 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Input Source [1..5] Visibility Video Input Source [1..5] OptimalDefinition Profile Define the visibility of the video input source in the menus on the user interface.
- Page 108 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Input Source [1..5] OptimalDefinition Threshold60fps Video MainVideoSource For each video input, this setting tells the system the lowest resolution where it should transmit Define which video input source shall be used as the main video source.
- Page 109 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Layout LocalLayoutFamily Video Layout RemoteLayoutFamily Select which video layout family to use locally. Select which video layout family to be used for the remote participants.
- Page 110 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Layout ScaleToFrame Video PIP ActiveSpeaker DefaultValue Position Define what to do if the aspect ratio of a video input source doesn't match the aspect ratio of Determine the position on screen of the active speaker picture-in-picture (PiP).
- Page 111 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Selfview Video SelfviewDefault Mode Determine if the main video source (self-view) shall be displayed on screen.
- Page 112 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video SelfviewDefault PIPPosition Video SelfviewDefault OnMonitorRole Determine the position on screen of the small self-view picture-in-picture (PiP) after a call. The Determine which monitor/output to display the main video source (self-view) on after a call.
- Page 113 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video OSD Mode Video OSD MenuStartupMode The OSD (On Screen Display) is where you find the menus, dialogs, icons and indicators, and Configure the state of the on-screen menus after a video system / codec boot.
- Page 114 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video OSD EncryptionIndicator Video OSD AutoSelectPresentationSource Define for how long the encryption indicator (a padlock) will be shown on screen. The setting Determine if the presentation source should be automatically selected.
- Page 115 Latin: Latin characters can be entered when using the remote control (default). Off: The local contacts will be placed in a separate folder called MyContacts in the Cyrillic: Cyrillic characters can be entered using the remote control. Requires a Cisco phonebook dialog.
- Page 116 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Output HDMI [1,3] RGBQuantizationRange Video Output HDMI [1,3] MonitorRole All devices with HDMI outputs should follow the rules for RGB video quantization range defined The HDMI monitor role describes which video stream will be shown on the monitor connected in CEA-861.
- Page 117 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Output HDMI [1,3] Resolution Video Output DVI [2,4] MonitorRole Select the preferred resolution for the monitor connected to the video output HDMI connector.
- Page 118 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings System settings Setting passwords Appendices Video Output DVI [2,4] Resolution Video Output Composite [5] OverscanLevel Select the preferred resolution for the monitor connected to the video output DVI-I connector.
-
Page 119: Experimental Settings
Appendices Experimental settings The Experimental settings are for testing only and should not be used unless agreed with Cisco. These settings are not documented and WILL change in later releases. D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013. -
Page 120: Setting Passwords
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Setting passwords Appendices Chapter 4 Setting passwords D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved. -
Page 121: Setting The System Password
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Setting passwords Appendices Setting the system password The system password protects the video system. You have Changing your own system password Changing another user’s system password... -
Page 122: Setting The Menu Password
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Setting passwords Appendices Setting the menu password The menu password protects the Administrator Settings Setting the menu password from the web... -
Page 123: Setting A Root Password
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Setting passwords Appendices Setting a root password You can protect the file system of your video system by Activate the root user and set the password setting a password for the root user. -
Page 124: Appendices
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Appendices D14635.13 Profile C90 and Codec C90 Administrator Guide TC7.0, DECEMBER 2013. www.cisco.com — Copyright © 2010-2013 Cisco Systems, Inc. All rights reserved. -
Page 125: Cisco Vcs Provisioning
Take care to use the correct file. Read the Cisco TMS Provisioning Deployment Guide to find how to upload the file to Cisco TMS, and how to set the desired values for the parameters to be provisioned. If not set by Cisco TMS, the default values will be used. -
Page 126: About Monitors
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices About monitors The video outputs of Codec C90 Connecting the main monitor The main monitor can be connected to any of the video... -
Page 127: Connecting The Cisco Telepresence Touch 8 Controller
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Connecting the Cisco Option A: To LAN socket (Ethernet) TelePresence Touch 8 controller Option B: To codec 2... -
Page 128: Advanced Customization Of Video And Audio
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Advanced customization of video and audio The codec supports full customization of the audio routing and video layouts/templates allowing support for advanced meeting room setups and integrations. -
Page 129: Optimal Definition Profiles
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Optimal definition profiles Under ideal lighting conditions the bandwidth (call rate) requirements can be substantially reduced. The optimal definition profile should reflect the lighting conditions in your room and the quality of the video input (camera);... -
Page 130: Clearpath — Packet Loss Resilience
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices ClearPath — Packet loss resilience ClearPath introduces advanced packet loss resilience mechanisms that increase the experienced quality when you use your video system in an error prone environment. -
Page 131: Requirement For Speaker Systems Connected To A Cisco Telepresence C Series Codec
Requirement for speaker systems connected to a Cisco TelePresence C Series codec Cisco has put in a lot of effort to minimize the camera to screen delay on our TelePresence endpoints. New consumer TVs are usually equipped with “Motion Flow”... -
Page 132: The Video Input Matrix
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices The video input matrix The video input matrix is found at the rear side of the codec and illustrates the combinations in which the video inputs can be connected. -
Page 133: Dnam For Profile 65
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices DNAM for Profile 65” The DNAM amplifier The DNAM (Digital Natural Audio Module) is DNAM loudspeaker built on two specially designed and separate •... -
Page 134: Factory Resetting The Codec
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Factory resetting the codec User interface: Touch Using the serial interface It is not possible to undo a factory reset. -
Page 135: Factory Resetting The Touch 8 Control Panel
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Factory resetting the Touch 8 control panel You can reset the Touch 8 control panel to its default factory 1. -
Page 136: Technical Specifications For Codec C90
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Technical specifications for Codec C90 UNIT DELIVERED COMPLETE WITH: Four HD-SDI inputs; supported formats: VIDEO OUTPUTS (5 OUTPUTS) •... - Page 137 Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices DUAL STREAM IP NETWORK FEATURES NETWORK INTERFACES PRECISIONHD CAMERA (1080P) • H.239 (H.323) dual stream • DNS lookup for service configuration •...
- Page 138 Useful Life Cycle > 6 years Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. Third party trademarks mentioned are the property of their respective owners.
-
Page 139: Technical Specifications For Profile 65" Dual
All images in these materials are for representational purposes only, actual products may differ. Cisco and the Cisco Logo are trademarks of Cisco Systems, Inc. and/or its affiliates in the U.S. and other countries. A listing of Cisco’s trademarks can be found at www.cisco.com/go/trademarks. -
Page 140: Supported Rfcs
Cisco TelePresence System Codec C90 and Profile 65” Dual using C90 Administrator Guide Contents Introduction Web interface System settings Setting passwords Appendices Appendices Supported RFCs The RFC (Request for Comments) series contains technical and organizational documents about the Internet, including the technical specifications and policy documents produced by the Internet Engineering Task Force (IETF). -
Page 141: User Documentation On The Cisco Web Site
Setting passwords Appendices Appendices User documentation on the Cisco web site In general, user documentation for the Cisco TelePresence products is available here: The documents are organized in the following categories: Installation guides: ► http://www.cisco.com/go/telepresence/docs Install and Upgrade > Install and Upgrade Guides You have to choose your product category in the right pane until you find your product. -
Page 142: Cisco Contacts
DOCUMENT FILES AND SOFTWARE OF THESE SUPPLIERS ARE PROVIDED “AS IS” WITH ALL FAULTS. CISCO AND THE ABOVE- On our web site you will find an overview of the worldwide Cisco contacts. NAMED SUPPLIERS DISCLAIM ALL WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, THOSE OF Go to: ►...