Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 243

Chapter 12 Building the Second Row Table (TX9200 Systems Only)
Assemble the privacy panel cosmetic covers (callouts 1 to 4) by completing the following steps:
Step 34
a.
Note
b.
c.
USE THE CORRECT M8 x 16mm SCREWS FOR THIS STEP.
Caution
shoulder washers.
Key Part Description
1 Privacy panel, 1
2 and Privacy panel, 2 and 5
5
3 and Privacy panel, 3 and 4
4
6 Privacy panel, 6
7 M8 x 16mm pan head screws, black
OL-27038-01
Slide the keyholes for privacy panel 1 the privacy panel into the aligning studs in the table structure;
then, slide the panels upwards, making sure to apply pressure to the sides when you are pushing up.
Follow the numbering in Figure 12-27
Two people may be required for this step.
Assemble the 3 screws (callout 5) from underneath to hold each panel.
Repeat Steps a. through b.
Part Number
700-37591-01
Kit # 69-2321-xx
700-37592-01
Kit # 69-2321-xx
700-37593-01
Kit # 69-2321-xx
700-37594-01
Kit # 69-2321-xx
48-2430-01
Kit # 53-3798-01
Subkit # 69-2353-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
to determine the correct privacy panel to use.
for the remaining privacy panels.
Qty
1
2
2
1
18
Assembling the Second Row Table
The correct screws do not have
Ctn Notes
53
53
53
53
47
12-33