Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 291

Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
Measure the distance between the first and second row table assemblies and adjust the distance as
Step 7
required.
Figure 13-35
Note
a 10-, 14-, or 18-seat system.
Note Make sure that the table legs are vertically level. If required, loosen the screws and adjust the vertical
level of the table legs, then retighten them.
Note You can place furniture sliders (flat plastic pieces) under the second row table legs to facilitate moving
of the table assembly.
Figure 13-35 Measuring the Distance Between the First and Second Row Table Assemblies
OL-27038-01
shows a second row with six sections; however, the measurements are the same for either
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Assembling a 4-Seat Second Row For a 10-Seat TX9200 System
13-45