Cabling and Room Considerations for Second Row Seating For the TX9200
To provide power to second row participants, you need to provide an electrical power source that is
located to the right side of the second row table. For an example information, see
Figure 2-6
Example of Floor-Mounted Junction Box for Second Row Power Connectivity
Location of Electrical Outlets for Systems that Use a Wall-Mounted Reflector
Wall
If your system uses a reflector wall that attaches directly to the wall, you should design a room with
electrical outlet placement as shown in
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
2-16
Chapter 2
Floor-mounted junction box
Figure
2-7.
Room Requirements for the TX9000 and TX9200 Systems
Figure
2-6.
OL-27038-01