Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 296

Assembling a 4-Seat Second Row For a 10-Seat TX9200 System
Assemble the power/Ethernet connections for the outside table legs by completing the following steps:
Step 11
a.
b.
Note
c.
Key Part Description
1
Power/Ethernet outlet
2
Outside Power/Ethernet outlet cover
3
M3 nut
4 Ethernet cable, 15 meter (49 feet)
5 Ethernet cable, 17 meter (55 1/2 feet)
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
13-50
Assemble power/Ethernet outlet (callout 1) into the lower hole in the power/Ethernet outlet cover
(callout 2) using M3 nuts that are included in the outlet kit (callout 3).
Attach an ethernet cable (callout 4) and, if required, a power cable to the power/Ethernet outlet.
Use the long Ethernet cable (callout 5) for table 800-37776-xx.
Repeat Steps a. through b.
Part Number
See Notes
800-37949-01
Kit # 69-2314-xx
49-0833-xx
37-1402-xx
Kit # 69-2351-xx
37-1403-xx
Kit # 69-2351-xx
Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
for the other outside outlet.
Qty Ctn
2
2 51
8
1 48
1 48
Notes
Part number varies by
country. Refer to
Appendix C, "Region- and
Country-Specific Power
Cords and Table Leg Power
Connectors," for the correct
part number.
Included with the
power/Ethernet outlet kit
OL-27038-01