Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 274

Assembling an 8-Seat Second Row For a 14-Seat TX9200
Assemble table section 700-37151-xx to the assembled table sections by completing the following steps:
Step 22
a.
b.
c.
d.
The images in
Note
Key Part Description
1
Second row table section, mid-right
Figure 13-22 Connecting the Mid-Right Table Section to the Assembled Table Sections
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
13-28
Position table section 700-37151-xx (callout 1) next to the assembled table sections.
Install four wooden biscuits (callout 2) into the slots; then, gently push the table sections together.
Position the 2 half-moon table joiners (callout 3) and tighten them to bring the tables together.
Attach two joint plates (callout 4) using 12 screws (callout 5).
Figure 13-22 are shown upside-down for clarity.
Part Number
700-37151-xx
Kit #69-2301-xx or
69-2386-xx
Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
Qty
1
Ctn Notes
73 Kit number depends on
type of table (maple or
walnut)
OL-27038-01