Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 272

Table of Contents

Advertisement

Assembling an 8-Seat Second Row For a 14-Seat TX9200
Assemble table sections 700-37147-xx and 700-37148-xx by completing the following steps:
Step 21
a.
Note
b.
c.
d.
USE THE CORRECT M8 x 16mm SCREWS FOR THIS STEP.
Caution
shoulder washers. Using incorrect, longer screws can cause leveling problems with the table sections.
The natural woods that are used for the tabletop finishes have a unique color, grain, and texture; as a
Note
result, there may be slight variations in grain between the table sections due to the natural formation of
the wood.
Key
Part Description
1
Second row table section, far-left
2
Second row table section, mid left
3
Wooden biscuits
4
Half-moon table joiners
5
Joint plates
6
M8 x 16mm pan head screws, black
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
13-26
Position table sections 700-37147-xx and 700-37148-xx on top of the table structure the correct
way up and slightly offset from their final position so you have access to the attachment points
underneath the table tops.
The images in
Figure 13-21
One person may have to support the parts while the other person follows the below steps and
assembles from below.
Install four wooden biscuits (callout 3) into the slots; then, gently push the table sections together.
Position the two half-moon table joiners (callout 4) and tighten them to bring the tables together.
Attach two joint plates (callout 5) using 12 screws (callout 6).
Part Number
700-37147-xx
Kit #69-2301-xx or
69-2386-xx
700-37148-xx
Kit #69-2301-xx or
69-2386-xx
700-23909-xx
Kit # 69-2299-xx
51-6068-xx
Kit # 69-2299-xx
700-23345-xx
Kit # 69-2314-xx
48-2430-xx
Kit # 53-3798-xx
Subkit # 69-2353-xx
Chapter 13
Building the Second Row Table For a 14- and 10-Seat TX9200 System
are shown upside-down for clarity.
Qty
1
1
4
2
2
12
The correct screws do not have
Ctn
Notes
73
Kit number depends on
type of table (maple or
walnut)
73
Kit number depends on
type of table (maple or
walnut)
51
51
51
47
OL-27038-01

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cts-tx9000Telepresence system tx9200Cts-tx9200

Table of Contents