Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 279

Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
Connect the microphone extension cables to the microphones and route the cables by completing the
Step 27
following steps:
a.
b.
c.
Use one additional extension cable for the microphone between table legs 800-37777-x and
Note
800-37776-xx.
Figure 13-27
Note
10-, 14-, or 18-seat system.
Key Part Description
1 Microphone extension cable
2 Velcro straps
Figure 13-27 Connecting the Microphone Extension Cables
Leg J
Leg K
OL-27038-01
Connect the microphone extension cables (callout 1) to the microphone cables.
Route all the microphones cables along the top row of the cable trays.
Use velcro straps to secure the cables (callout 2).
shows a second row with six sections; however, this assembly step is the same for either a
Part Number
37-0931-xx
Kit # 69-2351-xx
52-0499-xx
Kit # 69-2403-xx
Subkit # 53-3789-xx
Leg I
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Assembling an 8-Seat Second Row For a 14-Seat TX9200
Qty
7
70
Leg H
Leg G
Ctn Notes
48
6 There are 70 straps in the
kit.
Leg F
Leg E
13-33