Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 225

Chapter 12 Building the Second Row Table (TX9200 Systems Only)
Assemble the outside power/Ethernet connections by completing the following steps:
Step 20
a.
b.
Note
c.
Key Part Description
1
Power/Ethernet outlet
2
Outside power/Ethernet outlet cover
3
M3 nut
4 Ethernet cable, 15 meter (49 feet)
5 Ethernet cable, 17 meter (55 1/2 feet)
OL-27038-01
Assemble power/Ethernet outlet (callout 1) into the lower hole in the power/Ethernet outlet cover
(callout 2) using M3 nuts that are included in the outlet kit (callout 3).
Attach an ethernet cable (callout 4) and, if required, a power cable to the power/Ethernet outlet.
Use the long Ethernet cable (callout 5) for table leg E.
Repeat Steps a. through b.
Part Number
See Notes
800-37949-01
Kit # 69-2314-01
49-0833-01
37-1402-01
Kit # 69-2351-xx
37-1403-01
Kit # 69-2351-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
for the other outside outlet.
Qty Ctn
2
2 51
8
1 48
1 48
Assembling the Second Row Table
Notes
Part number varies by
country. Refer to
Appendix C, "Region- and
Country-Specific Power
Cords and Table Leg Power
Connectors," for the correct
part number.
Included with the
power/Ethernet outlet kit
12-15