Required Tools; Tools For Optional Seismic Bracket - Cisco TelePresence IX5200 Installation Manual
Hide thumbs
Also See for TelePresence IX5200:
- Installation manual (186 pages) ,
- First-time setup (40 pages) ,
- User manual (26 pages)
Advertisement
Cisco IX5000 and IX5200 Installation Guide
Required Tools
•
Metric Allen (hex) set
•
6mm T-handle hex key
•
7mm hex socket driver
•
#0, #1, #2 and #3 Phillips drivers
•
Snips and long nose pliers
•
Extensions for Phillips bits/long handle screw
drivers
•
Cordless driver
•
Socket wrench set (metric)
•
10mm, 13mm & 19mm wrench and adjustable
wrench
•
19mm 12-point ratcheting box end wrench
•
Spirit level or digital Level
•
Laser level with tripod
•
White gloves (included with accessory kit)
•
Metric tape measure
•
Box cutter
Page 1-4
© 2015 Cisco Systems, Inc. All rights reserved.
Tools for Optional
Seismic Bracket
• #3 Phillips Driver
• Drill and 1/2-inch (12.7mm) carbide drill bit
• 1 1/8 inch or 29mm open-end or box-end
wrenches or adjustable wrenches
• Torque wrench with 75 foot-pound (102 N-m) or
greater capacity
• 9/16 inch or 15mm socket
• Measuring tape
• Compressed air source (canned compressed air
is acceptable) to clean the holes after drilling
Advertisement
