Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 62

Installing the Reflector to the Wall
Install the panels by completing the following steps:
Step 7
Be careful not to mar the front of the panels while performing this installation.
Note
a.
b.
c.
Install the center panel first, then install the left-center and right-center panel.
d.
Key Part Description
1
Reflector Panel, center
2
Reflector Panel, center-left and
center-right
3 Reflector Panel, far left
4 Reflector Panel, far right
Figure 3-9 Installing the Wall Reflector Panels
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
3-10
Raise the panel so that the panel brackets are above the Z brackets.
Press the panel against the wall.
Lower the panel until it sits in the channels of the Z brackets.
Adjust the panels to create a seamless wall.
Part/Kit Number
700-36913-xx
Kit #69-2291
700-36911-xx
Kit #69-2291
700-36906-xx
Kit #69-2291
700-36910-xx
Kit #69-2291
Chapter 3 Installing the Wall-Mounted Reflector Wall Structure
Qty Ctn Notes
1 43-A
2 43-A
1 43-A
1 43-A
OL-27038-01