Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 323

Chapter 14 Completing Installation of the Main Display Structure
Install the top right panel to the light reflector by completing the following steps:
Step 5
a.
b.
c.
Key Part Description
1
Right top panel
2
Metal strip
3
Finger grip holes
Figure 14-8 Installing the Right Top Panel (1 of 2)—Panel Description
OL-27038-01
Insert the tongue on the top panel into the groove on the rear panel.
Attach the metal strip on the panel (callout 2 in
Make sure that the inboard edge of the top panel is aligned with the inboard edge of the rear panel.
Part Number
700-37192-01
Kit # 69-2311-xx
N/A
N/A
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Figure 14-8) to the magnet on the rear panel.
Qty Ctn Notes
1 4
N/A
N/A On some panel types, you can
insert your fingers into these
holes when you install the
panel.
14-9