Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 77

Chapter 4 Installing And Performing Initial Leveling of the Main Display Structure
Install the middle and upper tie-bars to the display structure.
Step 7
16 of the 48 screws attach horizontally from the rear of the structure.
Note
Do not fully tighten the screws until you perform final leveling of the entire display structure.
Note
Key Part Description
1
Tie-bar assembly, middle and
upper, left
2
Tie-bar assembly, middle and
upper, right
3
M8 x 16mm pan head screws
Figure 4-11 Installing the Middle and Upper Tie-Bars to the Display Structure
OL-27038-01
Part/Kit Number
700-37119-01
Kit #69-2323-xx
700-37118-01
Kit #69-2323-xx
48-3012-01
Kit #69-2365-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Qty Ctn
2 1
2 1
48 6
Installing and Leveling the Display Structure
Notes
4-13