Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 245

Chapter 12 Building the Second Row Table (TX9200 Systems Only)
Snap the microphone cable covers (callout 1) into the underside of the tables by squeezing the
Step 35
component as shown in
If you need to remove the covers, place your finger in the open edge of the cover and pull the cover out.
Tip
Key Part Description
1
Second row microphone cable cover
Figure 12-28 Placing the Microphone Covers Into the Underside of the Tables
Remove the protective film from the table legs.
Step 36
OL-27038-01
Figure 12-28
Part Number
700-37828-01
Kit # 69-2339-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
and placing it into the cable slot.
Qty
6
Assembling the Second Row Table
Ctn Notes
51
12-35