Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 354

Prepare the data display for assembly and install the display by completing the following steps:
Step 17
a.
b.
Use the Velcro straps to take up any slack in the cables.
Tip
Key Part Description
1 Data display
2 Data display channel
3 M6 x 20mm screws
4 Velcro straps
Figure 14-37 Assembling the Data Display to the Data Display Bracket (1 of 3)—Data Display and Channel Rear View
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
14-40
Install the power, signal, and serial cables to the data display (three in total).
Attach the display to the channel.
Part Number
74-10343-01
CTS-TX9K-
DATADISP
700-37139-01
Kit # 69-2323-xx
48-3013-01
Kit # 69-2395-01
52-0499-xx
Kit # 69-2403-xx
Subkit #
53-3789-xx
Chapter 14 Completing Installation of the Main Display Structure
Qty Ctn Notes
1 28
1 1
4 6
70 6 Use as necessary to take up
slack in the cables.
OL-27038-01