Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 283

Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
Assemble the privacy panel cosmetic covers (callouts 1 to 4) by completing the following steps:
Step 30
a.
Note
b.
c.
USE THE CORRECT M8 x 16mm SCREWS FOR THIS STEP.
Caution
shoulder washers.
Use the privacy panel in callout 1 for the far-left table section. Use the privacy panel in callout 2 and 5
for the mid-left and mid-right table sections. Use the privacy panel in callout 6
Key Part Description
1
Privacy panel, 1
2 and Privacy panel, 2 and 5
5
3 and Not used for a 14-seat system
4
6
Privacy panel, 6
7
M8 x 16mm pan head screws, black
OL-27038-01
Slide the keyholes for privacy panel 1 the privacy panel into the aligning studs in the table structure;
then, slide the panels upwards, making sure to apply pressure to the sides when you are pushing up.
Follow the numbering in Figure 13-30
Two people may be required for this step.
Assemble the 3 screws (callout 5) from underneath to hold each panel.
Repeat Steps a. through b.
Part Number
700-37591-xx
Kit # 69-2321-xx
700-37592-xx
Kit # 69-2321-xx
700-37594-xx
Kit # 69-2321-xx
48-2430-xx
Kit # 53-3798-xx
Subkit # 69-2353-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Assembling an 8-Seat Second Row For a 14-Seat TX9200
to determine the correct privacy panel to use.
for the remaining privacy panels.
Qty
1
2
1
18
The correct screws do not have
Ctn Notes
53
53
53
47
13-37