Differences In Conference Experience For 14- And 10-Seat Tx9200 Systems; Overview Of 18-, 14-, And 10- Seat System Installation - Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual

Differences in Conference Experience for 14- and 10-Seat TX9200 Systems

Differences in Conference Experience for 14- and 10-Seat
TX9200 Systems
For 18-seat TX9200 systems, the second row appears to other conference participants as a seamless table
with straight edges. In a conference with a 10- or 14-seat system, sections of the second row table are
removed. As a result, other attendees in the conference view the table with a curved front edge, as shown
in Figure
In addition, the second row table edges will be visible to other conference participants.
Figure 13-3 VIew of Second Row Table with Curved Table Edge

Overview of 18-, 14-, and 10- Seat System Installation

The entire TX9200 system is shipped for this type of customer installation; therefore, you will have some
extra table pieces, including table sections, table legs, electrical outlets, and privacy panels.
This chapter refers to the table legs by their part numbers, rather than the letter, as is used in the other
chapters.
Figure 13-4
Privacy panel part numbers are not shown in this figure. They all have the same part numbers:
Note
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
13-4
13-3.
shows the tabletop and table leg part numbers for an 18-seat TX9200.
Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
OL-27038-01