Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 292

Assembling a 4-Seat Second Row For a 10-Seat TX9200 System
Make sure that the first and second row tables are the same height by completing the following steps:
Step 8
a.
b.
Figure 13-36
Note
10-, 14-, or 18-seat system.
Figure 13-36 Aligning the First and Second Row Tables
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
13-46
Set up a laser level behind the second row.
Align the top of the table legs with the bottom of the wooden tabletops on the first row.
shows a second row with six sections; however, this assembly step is the same for either a
Chapter 13 Building the Second Row Table For a 14- and 10-Seat TX9200 System
OL-27038-01