Cisco TelePresence System TX9000 Assembly, Use & Care, And Field-Replaceable Unit Manual page 71

Chapter 4 Installing And Performing Initial Leveling of the Main Display Structure
Attach the connector plates to the lower tie-bar assemblies.
Step 3
Use the M8 x 16mm pan head screws to attach the plates to the tie-bars.
Note the markings "C", "R", and "L" on the tie-bars; C is center, R is right, L is left. Use these to align
Note
the tie-bars.
Key Part Description
1 Tie-bar assembly, lower left and
lower right
2 Tie bar connector plates
3 Dowel pins
4
M8 x 16mm Phillips head screws 48-3012-01
Figure 4-5 Attaching the Connector Plates to the Lower Left Tie Bar Assembly>
OL-27038-01
Part/Kit Number
700-37117-01
Kit #69-2323-xx
700-37120-01
Kit #69-2323-xx
N/A
Kit #69-2365-xx
Cisco TelePresence System TX9000 and TX9200 Assembly, Use & Care, and Field-Replaceable Unit Guide
Qty Ctn
2 1
4 1
N/A N/A
8 6
Installing and Leveling the Display Structure
Notes
Part of tie bar connector plates
4-7