Viewing Monitor Displays - YASKAWA SGDV User Manual

8.2

Viewing Monitor Displays

The monitor display can be checked or viewed in the Parameter/Monitor (-PRM/MON-) window of the digital
operator.
The following figure shows four factory settings that are first displayed if viewing monitor displays.
To view any items that are not shown, press the
Rotational angle 1 (encoder pulses from the phase-C origin)
Rotation angle 2 (from polarity origin (electric angle))
Indicates that the value of Un000
(motor rotating speed) is 0 min
or
U n 0 0 0 =
Motor rotating speed
U n 0 0 1 =
Speed reference
U n 0 0 2 =
Internal torque reference
U n 0 0 3 =
U n 0 0 4 =
U n 0 0 D =
Feedback pulse counter
8.2 Viewing Monitor Displays
-1
.
Analog
Key to scroll through the list.
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 0 0
0 0 0 9 0
0 0 0 0 0 0 0 0 0 0
Analog
8
8-3