Dc Power Input Σ-V Series Servopacks; Part Names - YASKAWA SGDV User Manual

1 Outline
1.1
DC Power Input Σ-V Series SERVOPACKs
The DC Power Input Σ-V Series SERVOPACKs are designed for applications that require frequent high-
speed, high-precision positioning. The SERVOPACK makes the most of machine performance in the
shortest time possible, thus contributing to improving productivity.
1.2

Part Names

This section describes the part names of SGDV SERVOPACK for analog voltage reference and pulse train ref-
erence.
SERVOPACK model
Refer to 1.6 SERVOPACK Model Designation.
Nameplate (Found on side of SERVOPACK.)
Indicates the SERVOPACK model and ratings.
CN2 Connector for encoder
Connects the encoder in the servomotor.
Refer to 3.5 Encoder Connection.
CN4 Connector for servomotor
Connects the main circuit cable for servomotor.
Refer to 3.1 Main Circuit Wiring.
CN3 Connector for power supply
Used for main circuit or control power supply input.
Refer to 3.1 Main Circuit Wiring.
1-2
CN1 Connector for I/O signal
Used for reference input signals and sequence I/O signals.
Refer to 3.2 I/O Signal Connections.
LED indicator (RDY, ALM)
RDY (green): Lights when the SERVOPACK is
in Servo Ready status without alarm.
WALM (red): Lights when an alarm occurs.
CN5 Connector for external monitor
For use with one of the following cables.
Relay cable (model: JZSP-CF1S00-A3-E) connected to
the Σ-V digital operator (model: JUSP-OP05A-1-E).
Connection cable (model: JZSP-CF1S05-A3-E) connected
to the analog monitor unit serving as a hub (model:
JUSP-PC001-E) to which a cable specially for the actual
analog monitor is connected.
When not in use, cover this connector.
Refer to 1.5 Examples of Servo System Configurations.
CN7 Connector for personal computer (USB connector)
Communicates with a personal computer.
Use the connection cable (model: JZSP-CVS06-02-E).
When not in use, cover this connector.
Analog