Syntax For The Actions - Siemens SINUMERIK 840D sl Commissioning Manual

Service Commands

3.2 Syntax for the Actions

Example:
An action with the privilege level 'user' can also always be executed by members of the
groups 'service' and 'manufact'. Actions with privilege level 'none' can be called by all users.
If a user does not have the required privileges, the following error message is output:
Action 'ACTION' needs at least GROUP privilege level.
3.2 Syntax for the Actions
Description
'sc' in the command line is essentially not case-sensitive.
The following entries are therefore interpreted as identical:
sc help show
SC help SHOW
sc HeLp sHoW
In some cases, however, upper/lower case can make a difference, for example in file or user
names. This is avoided wherever possible.
The conventions used are as follows:
● Names completely in upper case represent objects to be used depending on the
● Square brackets indicate optional entries.
● Alternatives are separated with '|'.
22
situation.
Example: sc help ACTION
In this case, ACTION is to be replaced by the action for which you want a description. If
written in lower case, however, the entry should be entered as specified.
Example: sc help [ACTION]
In this case the specification of an action is optional, which means that you can enter an
action, but do not have to. Square brackets may also be nested:
... [USERNAME[/DOMAIN]] ...
In this case, USERNAME and DOMAIN are both optional, but you can only enter a
DOMAIN if you have also entered the USERNAME.
Example: sc start all|system|SUBSYSTEM
This means that any of the following commands applies:
sc start all
sc start system
sc start SUBSYSTEM
In the latter case, SUBSYSTEM in upper case can be replaced by a concrete subsystem
name.
NCU Operating System (IM7)
Commissioning Manual, 01/2008, 6FC5397-1DP10-3BA0