Status Monitoring Via The "Hardware Status" Window - Hitachi HF-W2000 35 User Manual

9. RAID1

9.3.2 Status monitoring via the "Hardware status" window

On this Equipment, you can monitor the status of each HDD in the RAID1 system via the
"Hardware status" window. To open it, double-click the Hardware Status icon in the task
tray. When both HDDs are normally running, the "Hardware status" window will appear as
illustrated below.
Note: Under the RAS software, storage devices such as HDDs are generically referred to as
"drive" (singular) or "drives" (plural).
Hardware Status icon
Double-click
9-4