Information" Page; Figure 27: "Information" Page; Table 15: Description Of The Parameters Of The "Information" Page - WAGO -I/O-SYSTEM 750 User Manual

9.1.2

"Information" Page

After entering the IP address, the start page "Information" for web-based
management appears. This page provides information on the I/O-IPC and the
LAN.

Figure 27: "Information" page

The following table explains the parameters listed on the page:

Table 15: Description of the Parameters of the "Information" Page

Coupler Details
Order Number
Processor Type
Fieldbus Type
Firmware Revision
License Information
HTML Pages Revision
Network Details Eth0 (X8)/Eth1 (X9)
State
Mac Address
IP Address
Subnet Mask
WAGO I/O-SYSTEM 750
I/O-IPC-C10E, CANopen Master
Item number for the I/O-IPC
CPU used
Fieldbus type used
Firmware status
Notification that the runtime system CoDeSys is available.
Version of the internet pages.
Status of the Ethernet interface (activated/deactivated).
MAC address used to identify and address the I/O-IPC.
Current IP address of the I/O-IPC.
Current subnet mask of the I/O-IPC.
Configuration 61