Cylinder One Camshaft Frame Tightening Sequence - Triumph Scrambler 1200 XC Service Manual

Tighten cylinder two camshaft frame fixings to 5 Nm.
Tighten cylinder two camshaft frame fixings to 12 Nm.
If any components have been renewed, the valve clearances must be checked
and adjusted. Running with incorrectly adjusted valve clearances may cause
excess engine noise, rough running and engine damage.
39. Check all of the valve clearances and adjust as necessary until the correct
clearances are achieved (see Valve Clearance Adjustment).
Perform the following operations:
Alternator Cover - Installation
Camshaft Cover - Installation
Ignition Coils - Installation
Fuel Tank - Installation
Battery - Installation
Seat - Installation
Service Manual - Scrambler 1200 XC
cja h

Cylinder One Camshaft Frame Tightening Sequence

1
3
2
4
cja h
Cylinder Two Camshaft Frame Tightening Sequence
4
2
CAUTION
191 of 640