Triumph Scrambler 1200 XC Service Manual page 129

Note
Faults detected during road test or post road test inspection, must be rectified
before the motorcycle is released to the customer.
The distance covered on the road test should be long enough to allow a
satisfactory check to be made in the following areas:
Engine Cold Start Performance
Standard required:
The engine must start quickly and idle smoothly.
Note
This check is to be carried out when the engine is cold.
Action:
Turn the ignition switch to the ON position.
Start the engine and allow to idle.
ABS (anti-lock brake system) indicator light (models fitted with ABS only)
Standard required:
Refer to the Owner's Handbook for further information regarding the ABS indicator
light illumination sequence for the relevant model.
The ABS indicator light should flash on and off and continue to flash after engine start
up until the motorcycle first reaches a speed exceeding 6 mph (10 km/h).
Clutch
Standard required:
The clutch should engage smoothly, without judder, slipping or noise.
Gear Change
Standard required:
Changing between gears must be smooth and easily accomplished.
Throttle Response
Standard required:
Service Manual - Scrambler 1200 XC 129 of 640