Triumph Scrambler 1200 XC Service Manual page 553

Battery - Removal
1. Remove and discard the fixings securing the fall detection switch to the frame
below the storage box.
2. Disconnect the electrical connector and remove the fall detection switch.
1. Connect the electrical connector to the fall detection switch.
2. Fit the fall detection switch to the frame below storeage box and tighten the new
fixings to 3 Nm.
Service Manual - Scrambler 1200 XC
L0809
1. Fixings
2. Fall detection switch
3. Electrical connector
L0809
1
2
1
2
3
3
553 of 640