Triumph Scrambler 1200 XC Service Manual page 514

Perform the following operations:
Fuel Pump Assembly - Installation
Refit the fuel tank (see Fuel Tank - Installation).
Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
Perform the following operations:
Seat - Removal
Battery - Removal
Fuel Tank - Removal
Exhaust Silencer - Removal
Side Panels
Rear Mudguard - Removal
Engine Electronic Control Module (ECM) - Removal
Note
Before the disconnection of any wiring, note the routing of all wiring and wiring
connectors on both sides of the airbox.
1. Release the fixing and detach the air temperature sensor from the airbox.
2. Disconnect the ambient air pressure sensor connector.
Service Manual - Scrambler 1200 XC
1
2
3
cixt
1. Locking device
2. Locating lugs
3. Bracket
WARNING
514 of 640