Triumph Scrambler 1200 XC Service Manual page 355

Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
Perform the following operations:
Seat - Removal
Battery - Removal
Fuel Tank - Removal
Radiator - Removal
Sump Guard - Removal
Cradle Assemblies - Removal
Evaporative Canister (if fitted) - Removal
Coolant Expansion Tank - Removal
Exhaust Silencer - Removal, Left Hand Header Pipe - Removal and Exhaust
Catalytic Converter - Removal
Side Panels
Front Sprocket Cover - Removal
If required, drain the engine oil - Engine Oil and Filter Renew
1. Disconnect the coolant hose from the thermostat housing.
2. From the top of the frame, disconnect the following electrical connectors:
Spark plug leads
Fuel injectors
Coolant temperature sensor.
3. Disconnect the clutch cable from the crankcase (see Clutch Cable - Removal).
4. On the right side of the airbox, disconnect the gear position sensor electrical
connector from the main harness.
Service Manual - Scrambler 1200 XC
WARNING
1
355 of 640