Triumph Scrambler 1200 XC Service Manual page 142

Note
Note the position of the clutch cable brackets prior to removal.
3. Release the fixings securing the clutch cover to the crankcases. Note the position
of the encapsulated fixings and discard.
4. Place an oil catch tray beneath the clutch cover to collect any oil that may spill out
on removal.
5. Carefully withdraw the cover.
6. Remove the gasket and clean the surfaces of the crankcase and the clutch cover
Service Manual - Scrambler 1200 XC
L0710
1. Gear change actuator arm
2. Fixing
3. Actuator arm alignment mark
4. Gear change actuator arm split line
2
1
1
1
1
ciup
1. Fixings M6 x 50 mm
2. Fixings M6 x 40 mm
3. Encapsulated fixings M6 x 35 mm
1
2
2
3
2
2
2
2
2
2
2
3
142 of 640