Triumph Scrambler 1200 XC Service Manual page 358

Note
Note which spigot on the inlet manifold the MAP sensor hose is fitted to and, if
fitted, which spigot the evaporative emissions hose is fitted to for installation.
12. Disconnect the MAP hose and the evaporative emissions hose from the inlet
manifold.
13. Loosen the throttle body hose clamp.
14. Remove the four fixings securing the inlet manifold to the cylinder head and
detach it from the cylinder head. Remove and discard the two seals on the inlet
manifold.
Service Manual - Scrambler 1200 XC
L0859
1. Fixings
2. Mounting (right hand side shown)
1
cjdq
1. Evaporative hose
2. MAP sensor hose
1
2
3
358 of 640