Triumph Scrambler 1200 XC Service Manual page 238

12. Refit the clutch pull rod.
13. Fit the pressure plate. Ensure that the spring seats are fitted into the pressure
plate as noted for removal.
Note
Note that the stopper plate has an OUT mark. This must face outwards when
fitted.
There are spring seats located in the pressure plate. Ensure the seats are in
the pressure plate prior to fitting the springs.
14. Fit the springs and stopper plate, ensure that the OUT mark on the stopper plate
is facing outwards. Secure with the fixings and tighten to 10 Nm.
Service Manual - Scrambler 1200 XC
2. Clutch inner drum
3. Anti-judder seat washer
4. Anti-judder spring
5. Inner/outer friction plate
6. Friction plates
7. Steel plates
8. Steel plate (outer)
9. Pressure plate
4
1
1. Fixings
2. Stopper plate
3. Springs
4. Spring seats
5
3
2
238 of 640