Triumph Scrambler 1200 XC Service Manual page 179

2. In addition to the alignment mark, at TDC, the offset slot on the camshaft will align
with the upper surface of the cylinder head.
Note
The T3880650 - Camshaft Timing Plate has two different thickness edges
marked A and B. If side A will not slide smoothly into the camshaft slot side
use side B.
3. Insert the T3880650 - Camshaft Timing Plate into the camshaft slot. Ensure that
the tool is centrally located on the cylinder head and secure as shown below.
4. Remove the camshaft drive chain tensioner (see Camshaft Drive Chain
Tensioner - Removal).
To avoid damage to the camshaft frames, always ensure as many camshaft lobes
as possible are facing downwards. This will reduce stress on the camshaft
frames during removal. Damage to the camshaft frames will result in replacement
of the complete cylinder head.
Service Manual - Scrambler 1200 XC
1. T3880601 - Camshaft Timing Pin
2. Timing hole in alternator rotor
2
3
1
cizt
1. T3880650 - Camshaft Timing Plate
2. Camshaft slot
3. Fixings (6 x 12 mm)
CAUTION
3
179 of 640