Triumph Scrambler 1200 XC Service Manual page 622

or damage to the motorcycle.
1. Raise and support the motorcycle so that the rear wheel is clear of the ground.
Note
If both suspension units are to be removed, place a block beneath the rear
wheel to prevent it dropping when the second unit is removed.
2. Loosen and remove the lower mounting nut, sleeve and bolt. Discard the nut.
3. Loosen and remove the upper bolt and remove the suspension unit. Discard the
bolt.
4. Repeat steps 2 and 3 for the other rear suspension unit (if required).
1. Fit a new dust seal to the steering stem on the lower yoke as noted for removal.
Protect the threads of the lower yoke when using a press or a puller as damaged
threads may mean replacing the lower yoke completely.
2. Press a new lower bearing inner race onto the steering stem of the lower yoke.
Service Manual - Scrambler 1200 XC
2
L0735
1. Rear suspension unit
2. Upper mounting bolt
3. Lower mounting nut and bolt
WARNING
1
CAUTION
3
622 of 640