Cylinder Head - Removal - Triumph Scrambler 1200 XC Service Manual

12. Repeat the procedure until all valves requiring adjustment have been correctly
set.
13. Rotate the engine several times to fully seat the shims.
14. Repeat the clearance checks on all valves, adjust as necessary.
15. Refit the camshaft cover (see Camshaft Cover - Installation).
Perform the following operations:
Fuel Tank - Installation
Battery - Installation
Seat - Installation

Cylinder Head - Removal

Before starting work, ensure the motorcycle is stabilised and adequately
supported. This will help prevent it from falling and causing injury to the operator
or damage to the motorcycle.
Perform the following operations:
Seat - Removal
Battery - Removal
Fuel Tank - Removal
Engine - Removal
Camshaft Cover - Removal
Camshaft - Removal
1. Noting their position and the thickness of the shims, remove all eight shims from
the cylinder head.
2. Progressively release the cylinder head bolts in the order shown below.
Service Manual - Scrambler 1200 XC
cia a
Rocker Shaft Tightening Sequence
8
WARNING
4 2
6
195 of 640