Triumph Scrambler 1200 XC Service Manual page 211

Hide thumbs Also See for Scrambler 1200 XC:

Table of Contents

Lubricate the connecting rod small-end and gudgeon pin with clean engine oil.

Align the piston with the connecting rod, ensuring the triangular mark on the

piston crown is facing towards the front of the engine.

If the original pistons are being refitted, ensure they are fitted in their original

Insert the gudgeon pin into the piston and push it fully into position.

Secure the gudgeon pin in position with the remaining new circlip. Ensure the

circlip is correctly located in the piston groove.

Service Manual - Scrambler 1200 XC

Circlip Fitment