Triumph Scrambler 1200 XC Service Manual page 513

Perform the following operations:
Fuel Pump Assembly - Removal
Note
The mounting for the fuel level sensor is located inside the fuel tank. The
illustration shows the bracket outside the fuel tank for clarity.
1. Release the locking device and slide the fuel level sensor up the bracket and
release the two locating lugs from the bracket.
2. Remove the fuel level sensor.
Observe the warning advice given in the General Information section on the safe
handling of fuel and fuel containers.
A fire, causing personal injury and damage to property could result from spilled
fuel or fuel not handled or stored correctly.
1. Align the two locating lugs into the holes in the bracket.
2. Slide the fuel level sensor down the bracket for the locking device to engage and
secure the sensor.
Service Manual - Scrambler 1200 XC
1
2
3
cixt
1. Locking device
2. Locating lugs
3. Bracket
1
WARNING
513 of 640