Triumph Scrambler 1200 XC Service Manual page 601

2. With the aid of an assistant, raise the rear wheel until the filler opening is above
the radiator's upper coolant tank.
3. Slowly add coolant mixture to the system, through the filler opening, until coolant
escapes from the filler opening.
Note
If the system has filled correctly and fully, there should be coolant visible
through the filler opening.
Note
During filling, squeezing the bottom hose with both hands will help to pump
coolant around the system and remove trapped air.
4. Refit the coolant pressure cap.
5. Lower the motorcycle's rear wheel to the ground.
6. Refit the fuel tank (see Fuel Tank - Installation).
7. Reconnect the battery, positive (red) lead first and tighten the battery terminals to
4.5 Nm.
Service Manual - Scrambler 1200 XC
1. Hose clamps
2. Bottom hose
3. Coolant hose alignment mark
4. Hose alignment mark
1
cjfu
1. Filler opening
2. Radiator's upper coolant tank
2
601 of 640