Triumph Scrambler 1200 XC Service Manual page 582

4. Apply a proprietary high temperature grease to the header pipe studs on the
cylinder head.
5. Locate the exhaust header pipe to the cylinder head, ensure the gasket does not
become displaced during assembly. At the same time attach the header pipe to
the catalytic converter.
6. Fit the fixings to the cylinder head studs and tighten in the sequence shown
below.
Stage 1:
Header pipe lower nut to 10 Nm
Header pipe upper nut to 10 Nm
Retighten the header pipe lower nut to 10 Nm.
Stage 2:
Header pipe lower nut to 19 Nm
Header pipe upper nut to 19 Nm
Service Manual - Scrambler 1200 XC
1. Cylinder head port
2. Gasket
1. Header pipe lower nut
2. Header pipe upper nut
2
1
582 of 640