Triumph Scrambler 1200 XC Service Manual page 149

3. Position a new gasket to the crankcase dowels.
Note
When using ThreeBond 1216E the mating faces must come into contact with
each other within five minutes of application.
4. Apply a 2 mm (+/-0.5 mm) bead of silicone sealant to the outer surface of the
gasket in the area shown in the diagram below, during manufacture, ThreeBond
1216E is used.
5. Apply a 2 mm (+/-0.5 mm) bead of silicone sealant to the area of the alternator
Service Manual - Scrambler 1200 XC
civa
1. O-rings
2. Balancer dead shaft
1
2
ckjh
1. Sealant area
2. Gasket
2
149 of 640